Experimental Researches Regarding the Obtaining of Fine Air Bubbles
Zaid Abulghanam1, Nicolae Băran2, Sayel M. Fayyad3, Sameh Abu-Dalo4

1Zaid Abulghanam, Al-Balqa Applied University-Faculty of Engineering Technology” Jordan.
2Nicolae Băran, Politehnica” University of Bucharest, Department of Mechanical Engineering and Mechatronics, 313, Splaiul Independenţei, Bucharest, Romania.
3Sayel M. Fayyad, Al-Balqa Applied University-Faculty of Engineering Technology” Jordan.
4Sameh Abu-Dalo, Al-Balqa Applied University-Faculty of Engineering Technology” Jordan.

Manuscript received on 10 October 2017 | Revised Manuscript received on 18 October 2017 | Manuscript Published on 30 October 2017 | PP: 13-18 | Volume-7 Issue-1, October 2017 | Retrieval Number: A5168107117/17©BEIESP
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this paper the authors present the constructive solution of a new type of fine air bubbles generator. As the air output holes are located on a single row, the bubble columns that appear in the water mass generate a planar jet similar to a bubble curtain. This bubble curtain can be used to depurate residual waters or to enrich basins or lakes with oxygen. This fine bubble generator has Ø0.5mm holes, practiced by electro-erosion using an AG55L type machine that ensures the location of the holes in xoy coordinates as demanded by the designer. Images and results of experimental researches made on the fine bubbles generator, at different working levels, are exposed.
Keywords: Fine Bubbles Generator, Processing by Electro Erosion, Bubble Curtain.

Scope of the Article: Digital Signal Processing Theory