Working Model of Remote Controlled Hovercraft
Divyesh Dave1, Vimal Patel2, Dhrumil Parikh3, Sachin Prajapati4, Sumaiya Patel5
1Divyesh Dave, Dr. Jivraj Mehta Institute of Technology, Mogar, Anand, Gujarat, India.
2Vimal Patel, Dr. Jivraj Mehta Institute of Technology, Mogar, Anand, Gujarat, India.
3Dhrumil Parikh, Dr. Jivraj Mehta Institute of Technology, Mogar, Anand, Gujarat, India.
4Sachin Prajapati, Dr. Jivraj Mehta Institute of Technology, Mogar, Anand, Gujarat, India.
5Sumaiya Patel, Dr. Jivraj Mehta Institute of Technology, Mogar, Anand, Gujarat, India.
Manuscript received on July 23, 2014. | Revised Manuscript received on August 10, 2014. | Manuscript published on August 30, 2014. | PP: 195-201  | Volume-3 Issue-6, August 2014.  | Retrieval Number:  F3398083614/2013©BEIESP

Open Access | Ethics and Policies | Cite
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this study, mainly focus on analysis and procedure about designing and making of the working model of Hovercraft. Different criteria vital in designing procedure of the model hovercraft are theoretically calculated here. Subsequently, proper material is elected and working Hovercraft was prepared. Main problem is to create enough pressure of air cushion and that leads to decrease in accuracy and poor operation of model. Main intention of our project is to produce an amphibious vehicle that can also be operated over less perfect surfaces.
Keywords: Working model, Hovercraft, Design, Performance, Function, Component.