Microwave Antenna for Brain Tumour Sensing Research System using Image Processing
S Grout1, Naga Abhishek Reddy2, Goutam Parimal3, P. Bharath Kumar4, D. Sai Vamsi5, M. Ganesh6, Kannan Ganapathy7
1S Grout, Assistant Professor, Department of ECE, SRM Institute of Science and Technology, Chennai (Tamil Nadu), India.
2Naga Abhishek Reddy, UG Scholar, Department of ECE, SRM Institute of Science and Technology, Chennai (Tamil Nadu), India.
3B Goutam Parimal, UG Scholar, Department of ECE, SRM Institute of Science and Technology, Chennai (Tamil Nadu), India.
4P. Bharath Kumar, UG Scholar, Department of ECE, SRM Institute of Science and Technology, Chennai (Tamil Nadu), India.
5D Sai Vamsi, UG Scholar, Department of ECE, SRM Institute of Science and Technology, Chennai (Tamil Nadu), India.
6M Ganesh, Associate Professor, SMIT Mangadu, Chennai (Tamil Nadu), India.
7 Kannan Ganapathy, Associate Professor, SMIT Mangadu, Chennai (Tamil Nadu), India.
Manuscript received on 15 August 2019 | Revised Manuscript received on 27 August 2019 | Manuscript Published on 06 September 2019 | PP: 257-262 | Volume-8 Issue- 6S, August 2019 | Retrieval Number: F10520886S19/19©BEIESP | DOI: 10.35940/ijeat.F1052.0886S19
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: A 3D smicrostrip spatch santenna is designed using the computer simulation technology software. Along with sit the head phantom is screated. Then a tumour of 4mm3 is placed sinside sthe shead sphantom. This stumour sintroduced based on the relative permittivity. By susing Human Head Imaging the size of the antenna and other parameters are introduced. The antenna is placed side of the head, then a RF signal is sent to through the antenna. A reflecting beam is placed on the other side of the head, these reflecting signals are received by the antenna substrate. The results are based on the specific absorption rate (SAR). During the simulation the results of SAR with tumour and without tumour are compared.
Keywords: RF, HHI, CST, SAR.
Scope of the Article: Signal Control System & Processing