Experimental Study of Pool Effect of Shear, Flexure and Torsion on SFRC Beams
Mohammad Israil1, M S Jafiri2, Pushpendra Kumar Sharma3, Anshul Garg4

1Mohammad Israil, Associate Professor, University Polytechnic, Aligarh Muslim University, Aligarh, U.P., India.
2M.S. Jafiri, Associate Professor, Department of Civil Engineering, Aligarh Muslim University, Aligarh, U.P., India.
3Pushpendra Kumar Sharma*, Professor, Department of SCE, Lovely Professional University, Phagwara, Punjab, India.
4Anshul Garg, Assistant Professor, Department of SCE, Lovely Professional University, Phagwara, Punjab, India.
Manuscript received on July 22, 2020. | Revised Manuscript received on July 28, 2020. | Manuscript published on August 30, 2020. | PP: 233-236 | Volume-9 Issue-6, August 2020. | Retrieval Number: E1153069520/2020©BEIESP | DOI: E1153069520/2020©BEIESP
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Flexural, torsional, compressive and shear behavior of Steel Fiber Reinforced Concrete (SFRC) is already studied individually but none has studied the performance of SFRC beams under a combined effect of more than one state i.e. tension, flexure, torsion, compression and shear in general by now. In this study M20 grade of concrete beams under composite behavior of flexure, shear and torsion with different compositions of fibers mix were investigated. The dimensions of specimen beams was 100 mm x 100 mm x 500 mm and straight cylindrical fibers of length 0.28 mm and aspect ratio 100 were mixed. A total of 48 specimen were casted and tested such that for every percentage of fiber and each torsion value three beams were tested. Hence there are four torsion values 0, 61.75, 119.41 and 176.53 N-m are applied (4x3x4=48) It was found during study that ultimate bending stress and deflection increases due to increase in torsion where as the ductility reduced with the torsion enhancement for a specific fraction of fiber content. 
Keywords: About four key words or phrases in alphabetical order, separated by commas.