Performance Assessment of 1.20 MLD Sewage Treatment Plant
Sharma Dinesh1, Sharma Devinder2, Vikram Singh3

1Sharma Dinesh, Assistant Professor, SIRDA Institute of Engineering Technology, Sundernagar, (Himachal Pradesh), India.
2Sharma Devinder, Director, Principal, SIRDA Institute of Engineering Technology, Sundernagar, (Himachal Pradesh), India.
3Vikram Singh, SIRDA Institute of Engineering Technology, Sundernagar, (Himachal Pradesh), India.
Manuscript received on January 21, 2020. | Revised Manuscript received on February 05, 2020. | Manuscript published on February 29, 2020. | PP: 3884-3887 | Volume-9 Issue-3, February 2020. | Retrieval Number:  C6403029320/2020©BEIESP | DOI: 10.35940/ijeat.C6403.029320
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: A study was carried out to evaluate the performance of Sewage Treatment Plant in Ghumarwin area and the following conclusions have been drawn. The ranges of physical, chemical and biological characteristics of waste water quality which is in the permissible limits given by waste water, sewage effluent standard as per pollution control board. The results of parameters i.e. pH, BOD, COD, TSS, Oil & Grease after the sewage treatment is under the standards limits. The standards of sewage treatment parameters pH, BOD, COD, TSS, Oil & Grease up to 5.5-9.0, 30mg, l, 250mg l, 100mg, l and 10mg, l. The results of pH, BOD, COD, DO and SS were 7.0 to 7.5, 18.0 to 22.0 mg, l, 150.0 to 165 mg, l, 5.0 to 6.0 mg, l and 50.0 to 56.0 mg, l, which are within the permissible standard limits . In the present study, all the above parameters were compared with the limits given by Pollution Control Board and it was found that all parameters are with in the acceptable limits. Hence it is concluded that performance of Sewage Treatment Plant is good and in working condition.
Keywords: pH, BOD, COD, DO, TSS, Oil and Grease.